Advanced reflective IT-8 target for creating individual ICC profiles of scanners for professional color management. LaserSoft Imaging has a very high quality IT8 target production. Large manufacturers use LaserSoft Imaging's targets for their worldwide production and are impressed by the high quality.
This target is a 10x15 cm reflective target suitable for calibrating flatbed scanners for scanning photos and paper originals. This target cannot be used for the calibration of film scanners. Reflective targets are also available in larger sizes.
Benefits of LaserSoft Imaging IT-8 targets
- Higher precision than other manufacturers because smaller units are produced and calibrated
- Significant higher dynamic range
- A barcode on the target enables automatic detection of the according reference file (LaserSoft Imaging patent)
Scope of delivery
- LaserSoft Imaging IT-8 Target advanced reflective 10x15cm Kodak
Before you perform a colour calibration with an IT-8 target you should clean the target carefully in order to avoid fault measurements due to dust. For cleaning IT-8 targets we recommend an anti-static brush from Kinetronics. With an anti-static brush you can make a careful and professional cleaning and you remove static loads from the film material, and you avoid, respectively, that it charges up with static loads during the cleaning process.