The Epson Perfection V600 Photo is a low-price device for beginners in the series of Epson flatbed scanners. In the cover plate there is a transparency unit integrated, so that the scanner is suitable both for scanning documents and for digitizing slides and negatives. The scanner provides a good image quality when scanning documents and is fast. The image quality, however, is very bad when scanning negatives and slides using the standard scan software from Epson, since the density range of the scanner is too low. A significant improvement can be achieved by using the scan software SilverFast SE Plus thanks to the multi-exposure feature. More info on our detailed Test report about the Epson Perfection V600 Photo
The Epson Perfection V600 Photo plays to its strength not until operated with the professional scan software SilverFast Ai + IT-8 target. In order to achieve the best image quality we recommend to use SilverFast Ai Studio. With the SilverFast IT-8 colour calibration it is possible to individually calibrate your scanner and work within a professional colour management workflow. Thus the image quality of the scanner can be considerably increased and you do not have to spend a lot of time for extensive image editing.
In the scope of delivery of the Epson V600 one 35mm film holder is included. In order to work more effectively we recommend a second film holder, so that you can fill it, while the first one is inside the scanner.
In the scope of delivery of the Epson V600 one medium format film holder is included. In order to work more effectively we recommend a second film holder, so that you can fill it, while the first one is inside the scanner.
For the cleaning of the glass surface of the scanner we recommend the scanner cleaning set from Kinetronics. The set consists of an anti static cloth, with which you can clean the complete glass surface, and an anti static brush for cleaning smaller parts, but also for cleaning film material. Both the cloth and the brush have the special feature that they remove static charges, which adduct dust magically.
If the glass surface of the scanner is covered with strong dust we recommend the use of the Kinetronics cleaning fluid PLCD. That's a high value cleaning fluid, which has been developed especially for the cleaning of optical glasses and glass surfaces. With a couple of drops you can effectively remove dust and dirt.
When working with film strips it can often happen that you accidentally touch the emulsion side of the film. The damage often is irreparable. You can avoid damages to the film material and comfortably insert film strips into the scanner or film holder by wearing fine cotton gloves.
Anti-dust spray is used to clean film material - no matter if it's mounted slides or film strips - by removing dust and fluffs with a flimsy current of air without touching the film material at all. There is no better, more comfortable and more efficient way to clean your film material.
For working with single negatives or positives we highly recommend using tweezers, because otherwise you run the risk of touching and damaging the film.
If you work with digital images - no matter if they come from a digital camera or from a film scanner - you should calibrate your screen. Without a screen calibration performed with objective criteria you run the risk of wrongly adjusting the settings of the scan or the image editing software, which makes the image look right on your screen, but will cause unnatural alienated colours on other output devices (printer, image service, new screen).