The Reflecta ProScan 10T is the top recommendation in the middle price field for film scanners at the moment. It scans with a nominal resolution of 5000 ppi. As you can read in our Review about the Reflecta ProScan 10T
, the Reflecta ProScan 10T is a very fast scanner.
As you can read in our test report, too, the image quality is rather bad, if the scanner is operated with the manufacturer's scan software CyberView. You will get very good scans only if you use the SilverFast scan-software. If you intend to digitize mounted slides with the reflecta ProScan 10T you should use the SilverFast Ai Studio Scan-Software by all means and make an IT-8 colour calibration. If you intend to digitize negatives, you get the best results if you use SilverFast SE Plus or SilverFast Ai Studio and if you you select the suitable film type within the Negafix dialogue before scanning.
With the here offered bundle with SilverFast Ai Studio you achieve the best possible results with the Reflecta ProScan 10T. If you additionally make a colour calibration with an IT-8 target, you correct the colour errors of the scanner for slide scans and create a correction profile, which will be applied at each scan automatically. So you save a lot of work when postprocessing your scans in the image editing software.
In the scope of delivery of the Reflecta ProScan 10T there is a film holder for up to 4 mounted 35mm slides, and there is a film strip holder in which you can insert film strips up to a length of 6 pictures. The film holder is inserted into the scanner at its side; thanks to a viewing window over the sensor you can check, if the position is exactly right. A batch mode for automatic scanning of several slides or negatives is not offered by the ProScan 10T. As a higher-value alternative there is the Reflecta RPS 10M
, which can process complete film strips automatically.
Please, choose above, below the price information, between the SilverFast Ai Studio version and the SilverFast Archive Suite (Archive Suite = SilverFast Ai Studio + SilverFast HDR Studio). Also, please, choose above your desired targets (Kodak, Fuji, Kodachrome) for the IT-8 colour calibration. Detailed information about SilverFast and the available targets can be found on our SilverFast website. Information about SilverFast HDR can be found on our SilverFast HDR website. Information about scanner calibration can be found on our page Scanner IT-8 calibration.
Please, choose above, below the price information, if you want to order the scanner with or without Adobe® Photoshop® Elements.
- Optical resolution: 10.000 dpi
- Scan area: 24.3 x 36.5 mm
- Colour depth: 48 Bit
- Density range: 3.9 Dmax
- Fix focus
- Image sensor: 3-linear-CCD
- Light source: LED
- Scanning time: 7 min. with 10.000dpi and 24 Bit colour depth (Magic Touch activated)
- Magic Touch Technology
- Port: USB 2.0
- Weight: 1.0 kg
- Dimensions: 275x167x80 mm (LxWxH)
Supported film formats
- Mounted 35mm slides (5 x 5 cm, mount thickness max. 3,2 mm)
- 35mm film strips (positive or negative)
Scope of delivery
- Scanner Reflecta ProScan 10T
- USB cable
- Power supply
- Scan software Cyberview X
- SilverFast Ai Studio 8 / Archive Suite 8 (according to your choice above)
35mm IT-8 Target (according to your choice above)
- Adobe® Photoshop® Elements (according to your choice above)
- Film holder for 4 mounted slides
- Film strip holder for film strips with up to 6 frames
- User guide in English, German, French, Portuguese, Spanish, Italian, Dutch
- Windows 64-bit systems: Windows Vista, Windows 7, 8, 10
- MAC 64-bit systems: Mac OS X from 10.7
- 2 GHz Processor or faster (Multi-core recommended)
- 2 GB RAM main memory (4 GB RAM recommended)
- 2 GB free space on hard disk drive for the software file
- Up to 20 GB free space on the main system hard disk drive for the cache
- DVD drive or internet connection
- Latest firmware installed on scanner device
SilverFast 8 supports Photoshop CS3 to CS6 and CC.
(Photoshop CS6 and higher on OS X are only supported if 64 bit drivers are
available for the scanner.)
SilverFast 8 supports Photoshop Elements 8 to 13.
SilverFast 8 can also be installed on Windows as a TWAIN module.
Note: SilverFast 8 is Intel native software and thus it is not available for
PowerPC Mac systems (Those G4-microprocessors were only produced until the End of
One such slide mount holder is already included in the delivery content of the Reflecta ProScan 10T. With a second slide mount holder you can load it while the other one is inside the scanner. That saves time and makes scanning more effective and comfortable.
One such film strip holder is already included in the delivery content of the Reflecta ProScan 10T. With a second film strip holder you can load it while the other one is inside the scanner. That saves time and makes scanning more effective and comfortable.
When working with film strips it can often happen that you accidentally touch the emulsion side of the film. The damage often is irreparable. You can avoid damages to the film material and comfortably insert film strips into the scanner or film holder by wearing fine cotton gloves.
Anti-dust spray is used to clean film material - no matter if it's mounted slides or film strips - by removing dust and fluffs with a flimsy current of air without touching the film material at all. There is no better, more comfortable and more efficient way to clean your film material.
For working with single negatives or positives we highly recommend using tweezers, because otherwise you run the risk of touching and damaging the film.
Those who work
with digital images - no matter if they come from a digital camera or from a film
scanner - should absolutely calibrate their screen. Without a screen calibration
performed with objective criteria you run the risk of wrongly adjusting the settings of
the scan or the image editing software, which makes the image look right on your
screen, but will cause unnatural alienated colours on other output devices (printer,
image service, new screen).