Shop Sprache/Language

flaggedeutschland.jpg flaggeengland.jpg

Corona-Info: Actually you can still order in our online shop. Our online shop is updated several times a day, also at the week-end. All arctiles, which are marked as in stock can be shipped immediately. Please, note, that the delivery may take longer than stated. You can reach us per e-mail any time; our telephone is not available permanantly.

Dörr light panel LT-3838 LED 34x34cm dimmable

Illuminated area 34 x 34 cm

Incl. VAT (19%)plus shipping costs
Delivery time: 
2-5 days (in stock)

Dörr light panel LT-3838 LED 34x34cm dimmable

Ultra-slim LED light panel for viewing slides and negatives, for drawing and snapping. It can also be used as background lighting.
You can find further information and a shopping guide for light panels on our website about light panels.


  • Ultra-slim 8mm high!
  • Durable, safe and energy saving LEDs
  • High quality acrylic panels
  • Continuously dimmable 
  • Color rendering index Ra (CRI):> 90
  • Color temperature: 5600K
  • Luminous surface: 340x340 mm
  • Number of LEDs: 72
  • Luminous flux: approx. 1584 lm (1,4 lm/cm˛)
  • Rated power: 14.4W
  • Outside dimensions: 380 x 380 x 8 mm
  • Weight: 1125 g
  • Inconspicuous power supply in white (AC100-240V ~ 50 / 60Hz DC12V 2A)

Scope of delivery

  • Dörr light panel LT-3838 LED 34x34cm
  • Inconspicuous power supply in white (AC100-240V ~ 50 / 60Hz DC12V 2A)
  • protective sleeve
Recommended accessories
For the cleaning of the light panel we recommend the anti static cloth from Kinetronics. With that you can remove effectively dust and fluffs from the surface of the light panel. Furthermore, electrostatic charges, which adduct and hold dust, are discharged. So you can avoid that film material gets dirty when putting on the light panel.
With the help of an anti static brush you can clean a surface (film or light panel surface) from dust and fluffs and discharge electric charges at the same time. Discharging is important because electric charge adducts dust as is generally known. Kinetronics anti static brushes are available in different sizes.
If the glass surface of a scanner or a light panel is covered with strong dust we recommend the use of the Kinetronics cleaning fluid PLCD. That's a high value cleaning fluid, which has been developed especially for the cleaning of optical glasses and glass surfaces. With a couple of drops you can effectively remove dust and dirt.
When working with film strips it can often happen that you accidentally touch the emulsion side of the film. The damage often is irreparable. You can avoid damages to the film material and comfortably insert film strips into the scanner or film holder by wearing fine cotton gloves.
Anti-dust spray is used to clean film material - no matter if it's mounted slides or film strips - by removing dust and fluffs with a flimsy current of air without touching the film material at all. There is no better, more comfortable and more efficient way to clean your film material.
For working with single negatives or positives we highly recommend using tweezers, because otherwise you run the risk of touching and damaging the film. With such a pair of tweezers which have special flattened blades you can very comfortably put on films on the light panel and sort them.
Your cart: 0 Products 0,00 €
Your shopping cart is still empty.

Drag products here or use the corresponding buttons [Buy now] in order to fill your shopping cart.