The new reflecta light panel A4 has a viewing area sized 310 x 210 mm, so that 24 mounted 35mm slides can be viewed at the same time. The LED lamps provide consistent illumination of the viewing area, which means that also the border areas can be used for viewing transparencies.
The sleek design is creditable - this light panel integrates very well in a modern working environment due to its very low thickness.
You can find further information and a shopping guide for light panels on our website about light panels
Please, choose above, below the price information, if you want to order the scanner with or without Adobe® Photoshop® Elements.
- Viewing area: 31 x 21 cm
- Adjustable illumination (dimmable)
- Light source: LEDs
- LED lifetime: approx. 50.000 hours
- Colour temperature: 12.500 K (measured)
- Power supply: Adaptor DC 3,5mm 12V 8W
- Weight: approx 900g
- Dimensions: 36 x 27 x 0.8 cm
Scope of delivery
- Light pad A4
- Power adaptor
- User manual (German, English, Polish, Dutch, Portuguese, Spanish, Italian, French, Russian, Japanese, Korean, Arabic)
System requirements Photoshop Elements 9: Windows XP - 10, Mac OS 10.5.8 - 10.14Photoshop Elements 12: Windows 7 - 10, Mac OS 10.7 - 10.14
For the cleaning of the light panel we recommend the anti static cloth from Kinetronics. With that you can remove effectively dust and fluffs from the surface of the light panel. Furthermore, electrostatic charges, which adduct and hold dust, are discharged. So you can avoid that film material gets dirty when putting on the light panel.
With the help of an anti static brush you can clean a surface (film or light panel surface) from dust and fluffs and discharge electric charges at the same time. Discharging is important because electric charge adducts dust as is generally known. Kinetronics anti static brushes are available in different sizes.
If the glass surface of the scanner is covered with strong dust we recommend the use of the Kinetronics cleaning fluid PLCD. That's a high value cleaning fluid, which has been developed especially for the cleaning of optical glasses and glass surfaces. With a couple of drops you can effectively remove dust and dirt.
When working with film strips it can often happen that you accidentally touch the emulsion side of the film. The damage often is irreparable. You can avoid damages to the film material and comfortably insert film strips into the scanner or film holder by wearing fine cotton gloves.
Anti-dust spray is used to clean film material - no matter if it's mounted slides or film strips - by removing dust and fluffs with a flimsy current of air without touching the film material at all. There is no better, more comfortable and more efficient way to clean your film material.
For working with single negatives or positives we highly recommend using tweezers, because otherwise you run the risk of touching and damaging the film. With such a pair of tweezers which have special flattened blades you can very comfortably put on films on the light panel and sort them.